TanroDictionary Notebook
EN

Mechanical engineering dictionary

435 terms grouped by subject. Type in the filter to find a term in English, Vietnamese or Japanese.

Materials, Heat Treatment & Welding 75

  • steel

    JA鋼 はがねVIthép

    An alloy of iron and carbon, usually below 2% carbon, the most widely used engineering material.

  • carbon steel

    JA炭素鋼 たんそこうVIthép cacbon

    Steel whose properties depend mainly on carbon content, with little alloying.

  • mild steel

    JA軟鋼 なんこうVIthép thường (thép cacbon thấp)

    Low-carbon steel (about 0.1–0.25% C), easy to weld and machine, such as SS400.

  • alloy steel

    JA合金鋼 ごうきんこうVIthép hợp kim

    Steel with added Cr, Ni, Mo or similar to improve strength, hardenability or corrosion resistance.

  • stainless steel

    JAステンレス鋼 ステンレスこうVIthép không gỉ (inox)

    Steel containing at least about 10.5% chromium, forming a protective oxide film against rust.

  • tool steel

    JA工具鋼 こうぐこうVIthép dụng cụ

    Hard, wear-resistant steel used for cutting tools, dies and moulds.

  • high-speed steel

    JA高速度工具鋼 こうそくどこうぐこうVIthép gió (HSS)

    Tool steel alloyed with W, Mo and V that keeps hardness at high cutting temperatures; HSS.

  • cast iron

    JA鋳鉄 ちゅうてつVIgang

    An iron–carbon alloy with over 2% carbon, easy to cast and damping but brittle.

  • ductile iron

    JA球状黒鉛鋳鉄 きゅうじょうこくえんちゅうてつVIgang cầu

    Cast iron with spheroidal graphite, stronger and tougher than grey iron; JIS FCD.

  • aluminium alloy

    JAアルミニウム合金 アルミニウムごうきんVIhợp kim nhôm

    Aluminium alloyed with Cu, Mg, Si or Zn; light and machinable, e.g. A5052, A6061, A7075.

  • copper alloy

    JA銅合金 どうごうきんVIhợp kim đồng

    Copper alloyed with other elements, such as zinc (brass) or tin (bronze).

  • brass

    JA黄銅 おうどうVIđồng thau

    A copper–zinc alloy that machines easily, used for fittings, valves and connectors.

  • titanium alloy

    JAチタン合金 チタンごうきんVIhợp kim titan

    A light, strong, corrosion-resistant alloy that is hard to machine, such as Ti-6Al-4V.

  • resin

    JA樹脂 じゅしVInhựa

    A polymer material used for plastic parts, such as POM, PA, PC and ABS.

  • material certificate

    JAミルシートVIchứng chỉ vật liệu (mill cert)

    A producer's document stating the chemical composition and mechanical properties of a material lot.

  • tensile strength

    JA引張強さ ひっぱりつよさVIđộ bền kéo

    The maximum stress a material withstands under tension before breaking.

  • yield strength

    JA降伏点 こうふくてんVIgiới hạn chảy

    The stress at which a material begins to deform plastically and permanently.

  • elongation

    JA伸び のびVIđộ giãn dài

    The percentage increase in specimen length after fracture, indicating ductility.

  • hardness

    JA硬さ かたさVIđộ cứng

    A material's resistance to indentation or scratching at its surface.

  • Rockwell hardness

    JAロックウェル硬さVIđộ cứng Rockwell (HRC)

    A hardness scale based on indentation depth; hardened steel usually uses the HRC scale.

  • Vickers hardness

    JAビッカース硬さVIđộ cứng Vickers (HV)

    Hardness measured with a pyramidal diamond indenter, suited to thin layers and case depth.

  • Brinell hardness

    JAブリネル硬さVIđộ cứng Brinell (HB)

    Hardness measured by pressing a hard ball into the surface, used for castings and forgings.

  • toughness

    JA靭性 じんせいVIđộ dai

    A material's ability to absorb energy and resist fracture.

  • Charpy impact test

    JAシャルピー衝撃試験 シャルピーしょうげきしけんVIthử va đập Charpy

    A test breaking a notched specimen with a pendulum to measure impact energy.

  • fatigue

    JA疲労 ひろうVImỏi

    Failure of a material under repeated loading at stresses below its static strength.

  • corrosion

    JA腐食 ふしょくVIăn mòn

    Deterioration of metal by chemical or electrochemical reaction with its environment.

  • heat treatment

    JA熱処理 ねつしょりVInhiệt luyện

    Controlled heating and cooling to change a metal's structure and mechanical properties.

  • quenching

    JA焼入れ やきいれVItôi

    Heating steel to the austenite range then cooling rapidly to increase hardness.

  • tempering

    JA焼戻し やきもどしVIram

    Reheating hardened steel to a lower temperature to reduce brittleness and increase toughness.

  • annealing

    JA焼なまし やきなましVIủ

    Heating and slow cooling to soften metal, relieve stress and improve machinability.

  • normalizing

    JA焼ならし やきならしVIthường hoá

    Heating steel and cooling it in air to refine and homogenize the grain.

  • quench and temper

    JA調質 ちょうしつVItôi ram (tôi cải thiện)

    Quenching followed by high-temperature tempering to balance strength and toughness.

  • carburizing

    JA浸炭 しんたんVIthấm cacbon

    Diffusing carbon into low-carbon steel surfaces before quenching, giving a hard case and tough core.

  • nitriding

    JA窒化 ちっかVIthấm nitơ

    Diffusing nitrogen into steel surfaces at low temperature for hardness and wear resistance with little distortion.

  • induction hardening

    JA高周波焼入れ こうしゅうはやきいれVItôi cao tần

    Surface hardening by rapid heating with high-frequency induced current.

  • case depth

    JA硬化層深さ こうかそうふかさVIchiều sâu lớp thấm/tôi

    The distance from the surface to where the hardened layer still meets a specified hardness.

  • stress relief annealing

    JA応力除去焼なまし おうりょくじょきょやきなましVIủ khử ứng suất

    Low-temperature annealing to reduce residual stress after welding or machining.

  • heat treatment distortion

    JA熱処理ひずみ ねつしょりひずみVIbiến dạng nhiệt luyện

    Warping or dimensional change of a part caused by heat treatment.

  • surface treatment

    JA表面処理 ひょうめんしょりVIxử lý bề mặt

    Methods that coat or modify a surface for corrosion resistance, hardness or appearance.

  • plating

    JAめっきVImạ

    Depositing a thin metal layer on a surface, such as zinc, nickel or chrome plating.

  • anodizing

    JAアルマイトVIanod hoá (alumite)

    Electrolytically forming a protective oxide layer on aluminium, which can be dyed.

  • black oxide

    JA黒染め くろぞめVInhuộm đen

    Forming a thin black iron oxide layer on steel for mild rust protection without dimensional change.

  • painting

    JA塗装 とそうVIsơn

    Applying a paint coating to protect and colour a surface.

  • welding

    JA溶接 ようせつVIhàn

    Joining metals by local melting, with or without filler material.

  • arc welding

    JAアーク溶接 アークようせつVIhàn hồ quang

    Welding that uses the heat of an electric arc between an electrode and the workpiece.

  • shielded metal arc welding

    JA被覆アーク溶接 ひふくアークようせつVIhàn que (SMAW)

    Manual arc welding with a flux-coated stick electrode; SMAW.

  • MIG welding

    JAMIG溶接 ミグようせつVIhàn MIG

    Metal Inert Gas welding with a wire electrode, common for aluminium and stainless steel.

  • CO2 welding

    JA炭酸ガスアーク溶接 たんさんガスアークようせつVIhàn CO2 (MAG)

    Wire welding shielded by CO2 or a mixed gas, very common for steel in Japanese shops.

  • TIG welding

    JATIG溶接 ティグようせつVIhàn TIG (hàn argon)

    Tungsten Inert Gas welding with a non-consumable electrode, giving clean welds.

  • spot welding

    JAスポット溶接 スポットようせつVIhàn điểm

    Resistance welding that joins overlapping sheets at small spots.

  • laser welding

    JAレーザ溶接 レーザようせつVIhàn laser

    Welding with a high-energy laser beam, producing a small heat-affected zone.

  • brazing

    JAろう付け ろうづけVIhàn vảy cứng

    Joining metals with a filler melting above 450°C without melting the base metal.

  • soldering

    JAはんだ付け はんだづけVIhàn thiếc

    Joining with a filler melting below 450°C, common in electronics.

  • welding rod

    JA溶接棒 ようせつぼうVIque hàn

    An electrode or filler rod used in welding.

  • shielding gas

    JAシールドガスVIkhí bảo vệ

    Gas such as Ar or CO2 that protects the weld pool from air.

  • base metal

    JA母材 ぼざいVIkim loại cơ bản

    The metal of the parts being welded, as distinct from the weld metal.

  • weld bead

    JAビードVIđường hàn (bead)

    The strip of solidified metal formed by one welding pass.

  • fillet weld

    JAすみ肉溶接 すみにくようせつVImối hàn góc

    A roughly triangular weld joining two surfaces at right angles or in a lap.

  • groove weld

    JA開先溶接 かいさきようせつVImối hàn giáp mối (vát mép)

    A weld made in a prepared groove between two parts.

  • bevel preparation

    JA開先 かいさきVIvát mép hàn

    The edge shaped before welding so the weld fully penetrates the thickness.

  • penetration

    JA溶け込み とけこみVIđộ ngấu

    The depth to which the base metal is melted in a weld.

  • heat-affected zone

    JA熱影響部 ねつえいきょうぶVIvùng ảnh hưởng nhiệt (HAZ)

    Base metal not melted but structurally altered by welding heat; HAZ.

  • welding distortion

    JA溶接ひずみ ようせつひずみVIbiến dạng hàn

    Shrinkage and warping of a structure caused by uneven heating and cooling in welding.

  • spatter

    JAスパッタVIbắn tóe (xỉ bắn)

    Droplets of molten metal thrown out around a weld.

  • blowhole

    JAブローホールVIrỗ khí

    A gas cavity trapped inside weld metal or a casting.

  • undercut

    JAアンダーカットVIcháy cạnh

    A groove along the weld toe where base metal melted away without being filled.

  • weld crack

    JA溶接割れ ようせつわれVInứt mối hàn

    A crack in the weld metal or heat-affected zone.

  • tack weld

    JA仮付け溶接 かりづけようせつVIhàn đính

    A short temporary weld holding parts in position before final welding.

  • welding symbol

    JA溶接記号 ようせつきごうVIký hiệu hàn

    A drawing symbol indicating the type, size and location of a weld.

  • casting

    JA鋳造 ちゅうぞうVIđúc

    Pouring molten metal into a mould to form a part as it solidifies.

  • die casting

    JAダイカストVIđúc áp lực

    Injecting molten metal, usually aluminium or zinc, into a steel die under high pressure.

  • forging

    JA鍛造 たんぞうVIrèn

    Shaping metal by compressive force from a hammer or press, often while hot.

  • sheet metal

    JA板金 ばんきんVItôn tấm (kim loại tấm)

    Thin metal sheet, and the work of cutting, bending and joining it.

  • round bar

    JA丸棒 まるぼうVIthép tròn đặc (láp)

    Bar stock with a round cross-section used for turning shafts and pins.

  • flat bar

    JA平鋼 ひらこうVIthép la (thép dẹt)

    Steel bar stock with a thin rectangular cross-section.

Machining & Machine Tools 73

  • machining

    JA機械加工 きかいかこうVIgia công cơ khí (cắt gọt)

    Shaping parts by removing material with cutting tools on a machine.

  • machine tool

    JA工作機械 こうさくきかいVImáy công cụ

    A machine for working metal, such as a lathe, mill, grinder or drill press.

  • CNC

    JANC エヌシーVICNC (điều khiển số)

    Computer Numerical Control: operating a machine from a numerical program run by a computer.

  • lathe

    JA旋盤 せんばんVImáy tiện

    A machine that rotates the workpiece against a fixed tool to cut surfaces of revolution.

  • turning

    JA旋削 せんさくVItiện

    Cutting on a lathe to produce cylindrical faces, end faces and threads.

  • CNC lathe

    JANC旋盤 エヌシーせんばんVImáy tiện CNC

    A lathe controlled by a numerical program.

  • milling machine

    JAフライス盤 フライスばんVImáy phay

    A machine using a rotating multi-tooth cutter to cut flats, slots and pockets.

  • milling

    JAフライス加工 フライスかこうVIphay

    Machining with a rotating cutter while the workpiece or tool feeds.

  • machining center

    JAマシニングセンタVItrung tâm gia công (MC)

    A CNC milling machine with an automatic tool changer, performing many operations in one setup.

  • 5-axis machining

    JA5軸加工 ごじくかこうVIgia công 5 trục

    Machining with three linear and two rotary axes for complex surfaces.

  • drilling

    JA穴あけ あなあけVIkhoan

    Making holes with a rotating drill.

  • drill press

    JAボール盤 ボールばんVImáy khoan đứng

    A drilling machine with a vertical spindle above a work table.

  • tapping

    JAタップ加工 タップかこうVItaro

    Cutting internal threads in a hole with a tap.

  • reaming

    JAリーマ加工 リーマかこうVIdoa (bằng mũi doa)

    Finishing a drilled hole with a reamer for accurate size and finish.

  • boring

    JA中ぐり なかぐりVIkhoét lỗ (doa móc)

    Enlarging and truing an existing hole with a single-point tool.

  • grinding

    JA研削 けんさくVImài

    Machining with a high-speed abrasive wheel for high accuracy and fine finish.

  • surface grinder

    JA平面研削盤 へいめんけんさくばんVImáy mài phẳng

    A grinder for flat surfaces, usually holding work on a magnetic chuck.

  • cylindrical grinder

    JA円筒研削盤 えんとうけんさくばんVImáy mài tròn ngoài

    A grinder for external cylindrical surfaces of work turning between centres.

  • centerless grinding

    JAセンタレス研削 センタレスけんさくVImài vô tâm

    Cylindrical grinding without centres, the work supported between grinding wheel, regulating wheel and blade.

  • lapping

    JAラッピングVImài rà

    Ultra-fine finishing with loose abrasive between the work and a lap.

  • honing

    JAホーニングVImài khôn (honing)

    Finishing bores with rotating and reciprocating abrasive stones, as in cylinder bores.

  • polishing

    JA研磨 けんまVIđánh bóng

    Smoothing a surface to a shine with fine abrasives.

  • electrical discharge machining

    JA放電加工 ほうでんかこうVIgia công tia lửa điện (EDM)

    Eroding metal by electric sparks between electrode and work in a dielectric fluid; EDM.

  • wire EDM

    JAワイヤ放電加工 ワイヤほうでんかこうVIcắt dây (EDM dây)

    EDM that cuts profiles with a thin brass wire electrode.

  • die-sinking EDM

    JA形彫り放電加工 かたぼりほうでんかこうVIxung điện (EDM định hình)

    EDM using a shaped electrode to sink cavities, typically in moulds.

  • laser cutting

    JAレーザ加工 レーザかこうVIcắt laser

    Cutting sheet material with a focused laser beam.

  • plasma cutting

    JAプラズマ切断 プラズマせつだんVIcắt plasma

    Cutting conductive metal with a high-temperature plasma arc.

  • gas cutting

    JAガス切断 ガスせつだんVIcắt hơi (cắt gió đá)

    Cutting steel with a fuel gas and oxygen flame.

  • sawing

    JA切断 せつだんVIcưa (cắt phôi)

    Cutting bar or tube stock to length with a saw.

  • band saw

    JAバンドソーVImáy cưa vòng

    A saw using a continuous loop blade.

  • press working

    JAプレス加工 プレスかこうVIdập

    Forming sheet metal with dies in a press.

  • punching

    JA打ち抜き うちぬきVIđột lỗ

    Cutting holes or blanks from sheet with a punch and die.

  • bending

    JA曲げ加工 まげかこうVIchấn (uốn)

    Bending sheet metal to a set angle.

  • press brake

    JAプレスブレーキVImáy chấn

    A long press using a punch and die to bend sheet.

  • deep drawing

    JA絞り加工 しぼりかこうVIdập vuốt

    Forming flat sheet into hollow cup- or box-shaped parts.

  • injection molding

    JA射出成形 しゃしゅつせいけいVIép phun nhựa

    Injecting molten plastic into a closed mould to form parts.

  • mold

    JA金型 かながたVIkhuôn

    A metal tool that shapes products in pressing, casting or plastic moulding.

  • spindle

    JA主軸 しゅじくVItrục chính

    The rotating shaft of a machine that carries the tool or workpiece.

  • chuck

    JAチャックVImâm cặp

    A clamping device on the spindle for work or tools, such as a three-jaw chuck.

  • soft jaw

    JA生爪 なまづめVIchấu mềm

    Unhardened chuck jaws machined to fit the workpiece for accurate holding.

  • tailstock

    JA心押台 しんおしだいVIụ động

    The lathe unit opposite the headstock that supports long work with a centre.

  • vise

    JAバイスVIê tô

    A clamping device holding work on a milling table or bench.

  • jig

    JA治具 じぐVIđồ gá (jig)

    A device that locates and holds work or guides tools for repeat machining, assembly or inspection.

  • fixture

    JA取付具 とりつけぐVIđồ gá kẹp

    A device fixing the workpiece to the machine table during machining.

  • workpiece

    JAワークVIphôi (chi tiết gia công)

    The part being machined.

  • blank

    JA素材 そざいVIphôi liệu

    Starting material before machining, such as bar stock or a casting.

  • setup

    JA段取り だんどりVIgá đặt (setup)

    Preparing machine, tools, fixtures and program before production.

  • setup change

    JA段取り替え だんどりがえVIthay đổi gá đặt (changeover)

    Switching a machine from one product to another.

  • cutting speed

    JA切削速度 せっさくそくどVItốc độ cắt

    The relative speed between cutting edge and work, in m/min.

  • spindle speed

    JA回転数 かいてんすうVItốc độ trục chính (số vòng quay)

    Revolutions of the spindle per minute (min⁻¹).

  • feed rate

    JA送り速度 おくりそくどVIlượng chạy dao (bước tiến)

    The speed at which the tool advances relative to the work, in mm/rev or mm/min.

  • depth of cut

    JA切込み きりこみVIchiều sâu cắt

    The thickness of material removed in one pass.

  • cutting conditions

    JA切削条件 せっさくじょうけんVIchế độ cắt

    The combination of cutting speed, feed and depth of cut used.

  • roughing

    JA荒加工 あらかこうVIgia công thô

    An operation removing most of the stock at a high rate.

  • finishing

    JA仕上げ加工 しあげかこうVIgia công tinh

    The final operation reaching the required size and surface finish.

  • machining allowance

    JA取り代 とりしろVIlượng dư gia công

    Extra material left on a blank to be removed by machining.

  • coolant

    JA切削油 せっさくゆVIdung dịch làm mát

    Oil or fluid supplied to the cut for cooling, lubrication and chip removal.

  • chip

    JA切りくず きりくずVIphoi

    Material cut away from the workpiece during machining.

  • burr

    JAバリVIba via

    A sharp ridge of excess metal left on an edge after cutting.

  • deburring

    JAバリ取り バリとりVIđánh ba via

    Removing burrs from the edges of a part.

  • chatter

    JAびびりVIrung (rung động khi cắt)

    Self-excited vibration between tool and work that leaves wave marks.

  • built-up edge

    JA構成刃先 こうせいはさきVIlẹo dao

    Work material welded onto the cutting edge, spoiling the surface finish.

  • tool wear

    JA工具摩耗 こうぐまもうVImòn dao

    Gradual wear of the cutting edge during machining.

  • tool life

    JA工具寿命 こうぐじゅみょうVItuổi bền dao

    The time or number of parts a tool cuts before replacement.

  • NC program

    JANCプログラム エヌシープログラムVIchương trình NC

    A set of instructions controlling the motion and functions of a CNC machine.

  • G-code

    JAGコード ジーコードVImã G

    Standard CNC program codes specifying motion types, such as G00 and G01.

  • work coordinate system

    JAワーク座標系 ワークざひょうけいVIhệ toạ độ phôi

    A coordinate system with its origin on the work, used by the program (G54 etc.).

  • tool offset

    JA工具補正 こうぐほせいVIbù dao

    Tool length and radius compensation values entered in a CNC machine.

  • CAM

    JACAM キャムVICAM (lập trình gia công)

    Computer-Aided Manufacturing: software generating toolpaths and NC programs from CAD models.

  • cycle time

    JAサイクルタイムVIthời gian chu kỳ (cycle time)

    The time needed to complete one part.

  • dry run

    JAドライランVIchạy thử không phôi

    Running a program without cutting to check the toolpath.

  • first article

    JA初品 しょひんVIsản phẩm đầu tiên (hàng mẫu đầu)

    The first part made after setup, inspected before mass production.

  • 3D printing

    JA3Dプリンタ造形 スリーディープリンタぞうけいVIin 3D

    Building parts layer by layer from a digital model.

Tools & Shop Floor 70

  • hand tool

    JA手工具 てこうぐVIdụng cụ cầm tay

    A tool operated by hand without a motor, such as a spanner or screwdriver.

  • power tool

    JA電動工具 でんどうこうぐVIdụng cụ điện cầm tay

    A hand-held tool driven by electricity or battery, such as a drill or grinder.

  • wrench

    JAスパナVIcờ lê

    An open-jawed tool for turning bolts and nuts.

  • box wrench

    JAメガネレンチVIcờ lê vòng (tròng)

    A wrench with a closed ring end that encircles the nut.

  • adjustable wrench

    JAモンキーレンチVImỏ lết

    A wrench with an adjustable jaw opening.

  • socket wrench

    JAソケットレンチVItuýp (khẩu)

    Interchangeable sockets fitted to a handle for turning bolts.

  • hex key

    JA六角レンチ ろっかくレンチVIlục giác (chìa lục giác)

    An L-shaped hexagonal bar for driving socket head screws.

  • torque wrench

    JAトルクレンチVIcờ lê lực

    A wrench set to a specific torque to tighten to the specified value.

  • screwdriver

    JAドライバーVItua vít

    A tool for turning screws, with a flat or Phillips (+) tip.

  • pliers

    JAペンチVIkìm

    A two-jawed tool for gripping, bending and cutting wire.

  • hammer

    JAハンマーVIbúa

    A striking tool; shops often use plastic or copper hammers to avoid damaging parts.

  • file

    JAやすりVIgiũa

    A toothed steel bar for hand-shaping and smoothing surfaces and edges.

  • hacksaw

    JA金切りのこ かなきりのこVIcưa sắt

    A framed hand saw for cutting metal.

  • center punch

    JAセンターポンチVIchấm dấu

    A pointed tool for marking hole centres before drilling.

  • scriber

    JAけがき針 けがきばりVImũi vạch

    A hardened steel point for marking lines on metal.

  • marking out

    JAけがきVIvạch dấu

    Drawing lines and centres on work as a guide for machining.

  • bench vise

    JA万力 まんりきVIê tô bàn nguội

    A vise mounted on a workbench to hold parts for filing or sawing.

  • grinder

    JAグラインダーVImáy mài cầm tay

    A hand-held disc grinder for grinding, cutting and deburring.

  • impact driver

    JAインパクトドライバーVImáy bắt vít

    A powered driver with a rotary hammer mechanism delivering high torque.

  • cutting tool

    JA切削工具 せっさくこうぐVIdụng cụ cắt

    A tool with a cutting edge for removing material, such as turning tools, mills and drills.

  • turning tool

    JAバイトVIdao tiện

    A single-point tool mounted on a lathe to cut rotating work.

  • insert

    JAチップVImảnh dao (insert)

    A replaceable carbide cutting tip clamped in a tool holder.

  • tool holder

    JAホルダVIcán dao (đài dao)

    The body that holds an insert or cutting tool on the machine.

  • cemented carbide

    JA超硬合金 ちょうこうごうきんVIhợp kim cứng (carbide)

    Tool material of tungsten carbide grains bonded with cobalt, very hard and heat-resistant.

  • cermet

    JAサーメットVIcermet

    A ceramic–metal tool material based on TiC/TiN, giving fine finishing surfaces.

  • CBN

    JACBN シービーエヌVICBN (nitrua bo lập phương)

    Cubic Boron Nitride: a superhard tool material for machining hardened steel.

  • coating

    JAコーティングVIlớp phủ dao

    A thin layer such as TiN or TiAlN applied to tools to extend life.

  • drill

    JAドリルVImũi khoan

    A fluted cutting tool with edges at the tip for making holes.

  • center drill

    JAセンタードリルVImũi khoan tâm

    A short drill for spotting holes or making centre holes.

  • end mill

    JAエンドミルVIdao phay ngón

    A milling cutter with end and side teeth for slots, pockets and profiles.

  • ball end mill

    JAボールエンドミルVIdao phay cầu

    An end mill with a hemispherical tip for 3D curved surfaces.

  • face mill

    JA正面フライス しょうめんフライスVIdao phay mặt

    A large-diameter cutter with multiple inserts for facing flat surfaces.

  • tap

    JAタップVImũi taro

    A tool for cutting internal threads.

  • die

    JAダイスVIbàn ren

    A tool for cutting external threads on rods and bolts.

  • reamer

    JAリーマVImũi doa

    A multi-edged tool for precision finishing of holes.

  • countersink

    JA面取りカッター めんとりカッターVImũi vát mép lỗ (khoét côn)

    A cutter that makes a conical chamfer at a hole for countersunk screws.

  • grinding wheel

    JA砥石 といしVIđá mài

    A bonded abrasive wheel used for grinding.

  • tool magazine

    JAツールマガジンVIổ dao

    Tool storage on a machining centre feeding the automatic tool changer.

  • collet

    JAコレットVIống kẹp (collet)

    A slotted sleeve that grips a tool or round work when tightened.

  • workshop

    JA工場 こうじょうVIxưởng

    A place with machines and workers for production and machining.

  • shop floor

    JA現場 げんばVIhiện trường (xưởng sản xuất)

    Where actual production work takes place.

  • three actuals

    JA三現主義 さんげんしゅぎVInguyên tắc 3 hiện (3 Gen)

    The principle of solving problems at the actual place, with the actual part and actual situation.

  • 5S

    JA5S ごエスVI5S

    A workplace method: Sort, Set in order, Shine, Standardize, Sustain (Seiri, Seiton, Seiso, Seiketsu, Shitsuke).

  • sort

    JA整理 せいりVIsàng lọc (Seiri)

    Step 1 of 5S: separate and remove what is not needed.

  • set in order

    JA整頓 せいとんVIsắp xếp (Seiton)

    Step 2 of 5S: place needed items where they are easy to find and return.

  • shine

    JA清掃 せいそうVIsạch sẽ (Seiso)

    Step 3 of 5S: clean machines and the workplace while checking for abnormalities.

  • standardize

    JA清潔 せいけつVIsăn sóc (Seiketsu)

    Step 4 of 5S: keep the first three S's as a standard.

  • sustain

    JA躾 しつけVIsẵn sàng (Shitsuke)

    Step 5 of 5S: build the habit of following the rules.

  • kaizen

    JA改善 かいぜんVIcải tiến (kaizen)

    Continuous improvement in small steps, driven by people on the shop floor.

  • kaizen proposal

    JA改善提案 かいぜんていあんVIđề xuất cải tiến

    An improvement idea submitted by an employee through a company system.

  • hourensou

    JA報連相 ほうれんそうVIbáo cáo – liên lạc – thảo luận (Hō-Ren-Sō)

    The Japanese work rule of timely reporting, informing and consulting with superiors.

  • near miss

    JAヒヤリハットVIsuýt xảy ra tai nạn (hiyari hatto)

    An incident that almost caused an accident, recorded for prevention.

  • hazard prediction training

    JA危険予知訓練 きけんよちくんれんVIhuấn luyện dự đoán nguy hiểm (KYT)

    Group activity identifying hazards in a task before starting; KYT.

  • pointing and calling

    JA指差呼称 しさこしょうVIchỉ tay hô xác nhận

    Pointing at an object and calling out aloud to confirm safety.

  • lockout tagout

    JAロックアウト・タグアウトVIkhoá và treo biển (LOTO)

    Isolating and locking energy sources with warning tags before servicing; LOTO.

  • personal protective equipment

    JA保護具 ほごぐVIbảo hộ lao động (PPE)

    Personal protective gear such as glasses, gloves, shoes and helmets; PPE.

  • standard work

    JA標準作業 ひょうじゅんさぎょうVIcông việc tiêu chuẩn

    The standard sequence, time and in-process stock for performing a job.

  • work instruction

    JA作業標準書 さぎょうひょうじゅんしょVIhướng dẫn công việc

    A document describing steps and key points for an operation.

  • process

    JA工程 こうていVIcông đoạn

    A step in the production sequence of a product.

  • visual management

    JA見える化 みえるかVIquản lý trực quan

    Displaying status and problems with boards and colours so anyone can see them.

  • andon

    JAアンドンVIđèn báo (andon)

    A light or board signalling abnormalities on a line.

  • poka-yoke

    JAポカヨケVIchống sai lỗi (poka-yoke)

    A device that prevents or detects operator mistakes so defects are not made.

  • muda

    JAムダVIlãng phí (muda)

    Non-value-adding activity such as waiting, transport and excess inventory.

  • just-in-time

    JAジャストインタイムVIđúng lúc (JIT)

    Producing what is needed, when needed, in the amount needed; JIT.

  • kanban

    JAかんばんVIthẻ kanban

    A card authorizing production or withdrawal in the Toyota pull system.

  • QC circle

    JAQCサークル キューシーサークルVInhóm QC

    A small shop-floor group solving quality problems on its own.

  • morning meeting

    JA朝礼 ちょうれいVIhọp đầu ca (chōrei)

    A short start-of-day meeting sharing plans and safety notes.

  • preventive maintenance

    JA予防保全 よぼうほぜんVIbảo trì phòng ngừa

    Scheduled maintenance to prevent unexpected breakdowns.

  • daily inspection

    JA日常点検 にちじょうてんけんVIkiểm tra hằng ngày (đầu ca)

    Operator checks of a machine against a checklist before work.

  • TPM

    JATPM ティーピーエムVIbảo trì năng suất toàn diện (TPM)

    Total Productive Maintenance: company-wide maintenance to maximize equipment effectiveness.

Machine elements 74

  • machine element

    JA機械要素 きかいようそVIchi tiết máy

    A basic component of machines, such as a bolt, shaft, bearing or gear.

  • bolt

    JAボルトVIbu lông

    A headed, externally threaded fastener used with a nut to clamp parts together.

  • nut

    JAナットVIđai ốc (ê-cu)

    An internally threaded part screwed onto a bolt to form a joint.

  • washer

    JA座金 ざがねVIvòng đệm (long đền)

    A thin ring placed under a nut or bolt head to spread load and protect the surface.

  • spring washer

    JAばね座金 ばねざがねVIlong đền vênh

    A split, springy washer used to resist loosening of threaded joints.

  • screw

    JAねじVIvít

    A threaded part used for fastening or transmitting motion.

  • machine screw

    JA小ねじ こねじVIvít máy

    A small screw with a slotted or recessed head, driven into a tapped hole.

  • hex socket head cap screw

    JA六角穴付きボルト ろっかくあなつきボルトVIbu lông lục giác chìm

    A cylindrical-head bolt with a hexagon socket, tightened with an Allen key.

  • set screw

    JA止めねじ とめねじVIvít trí (vít không đầu)

    A headless screw used to fix a part in position on a shaft.

  • stud bolt

    JA植込みボルト うえこみボルトVIvít cấy (gu-giông)

    A rod threaded at both ends, one end screwed into a body, the other taking a nut.

  • tapping screw

    JAタッピンねじ タッピンねじVIvít tự ren

    A screw that forms its own thread when driven into a plain hole in sheet or plastic.

  • thread

    JAねじ山 ねじやまVIren

    The helical ridge on the cylindrical or conical surface of a threaded part.

  • metric thread

    JAメートルねじ メートルねじVIren hệ mét

    An ISO standard 60° thread designated by M and the nominal diameter.

  • pitch

    JAピッチVIbước ren

    The axial distance between adjacent thread crests.

  • tightening torque

    JA締付けトルク しめつけトルクVImô-men siết

    The specified torque applied to a fastener to achieve the required clamping force.

  • rivet

    JAリベットVIđinh tán

    A permanent fastener whose end is upset to join plates.

  • pin

    JAピンVIchốt

    A cylindrical or tapered part used to locate or join components.

  • dowel pin

    JA平行ピン へいこうピンVIchốt định vị

    A press-fitted cylindrical pin that accurately locates two parts.

  • cotter pin

    JA割りピン わりピンVIchốt chẻ

    A doubled metal pin passed through a hole and splayed to lock a nut.

  • retaining ring

    JA止め輪 とめわVIvòng chặn (phe cài)

    A spring ring fitted into a shaft or bore groove to prevent axial movement.

  • key

    JAキーVIthen

    A part inserted between shaft and hub to transmit torque.

  • keyway

    JAキー溝 キーみぞVIrãnh then

    A slot cut in a shaft or hub to receive a key.

  • spline

    JAスプラインVIthen hoa

    Multiple axial grooves on a shaft mating with a hub, carrying high torque and allowing sliding.

  • shaft

    JA軸 じくVItrục

    A rotating cylindrical member that supports parts and transmits torque.

  • hub

    JAハブVImay-ơ

    The central part of a gear, pulley or wheel that fits onto a shaft.

  • coupling

    JA軸継手 じくつぎてVIkhớp nối trục

    A device joining two shaft ends to transmit torque, often accommodating misalignment.

  • universal joint

    JA自在継手 じざいつぎてVIkhớp các-đăng

    A joint transmitting rotation between shafts at an angle.

  • bearing

    JA軸受 じくうけVIổ trục (bạc đạn)

    A component that supports a rotating shaft, reducing friction and carrying load.

  • rolling bearing

    JA転がり軸受 ころがりじくうけVIổ lăn

    A bearing with balls or rollers rolling between inner and outer rings.

  • ball bearing

    JA玉軸受 たまじくうけVIvòng bi (ổ bi)

    A rolling bearing using balls as rolling elements.

  • deep groove ball bearing

    JA深溝玉軸受 ふかみぞたまじくうけVIổ bi đỡ một dãy

    The most common ball bearing, carrying radial and moderate axial loads.

  • tapered roller bearing

    JA円すいころ軸受 えんすいころじくうけVIổ đũa côn

    A bearing with tapered rollers carrying combined heavy radial and axial loads.

  • needle bearing

    JA針状ころ軸受 しんじょうころじくうけVIổ kim

    A rolling bearing with thin needle rollers and a small radial section.

  • thrust bearing

    JAスラスト軸受 スラストじくうけVIổ chặn

    A bearing designed mainly to carry axial loads.

  • plain bearing

    JAすべり軸受 すべりじくうけVIổ trượt (bạc)

    A bearing in which the shaft slides directly on a lubricated bush.

  • bushing

    JAブッシュVIbạc lót

    A sleeve fitted into a bore as a sliding or wear surface.

  • bearing housing

    JA軸受箱 じくうけばこVIgối đỡ (ổ đỡ)

    A housing that holds and mounts a bearing on a machine.

  • oil seal

    JAオイルシールVIphớt chặn dầu

    A lip seal on a rotating shaft that keeps oil in and dirt out.

  • O-ring

    JAOリング オーリングVIgioăng chữ O (O-ring)

    A rubber seal of circular cross-section fitted in a groove.

  • gasket

    JAガスケットVIgioăng (đệm làm kín)

    A seal placed between two stationary surfaces to prevent leakage.

  • spring

    JAばねVIlò xo

    An elastic part that stores energy when deformed.

  • compression spring

    JA圧縮コイルばね あっしゅくコイルばねVIlò xo nén

    A helical spring loaded in axial compression.

  • tension spring

    JA引張コイルばね ひっぱりコイルばねVIlò xo kéo

    A helical spring with end hooks, loaded in tension.

  • power transmission

    JA動力伝達 どうりょくでんたつVItruyền động

    Transferring power and motion from a prime mover to the driven machine.

  • gear

    JA歯車 はぐるまVIbánh răng

    A toothed wheel that meshes with another to transmit rotation.

  • spur gear

    JA平歯車 ひらはぐるまVIbánh răng trụ răng thẳng

    A cylindrical gear with teeth parallel to the axis.

  • helical gear

    JAはすば歯車 はすばはぐるまVIbánh răng trụ răng nghiêng

    A cylindrical gear with angled teeth, quieter and stronger than spur gears.

  • bevel gear

    JAかさ歯車 かさはぐるまVIbánh răng côn

    A conical gear transmitting motion between intersecting shafts.

  • worm gear

    JAウォームギヤVIbộ truyền trục vít – bánh vít

    A worm and wheel set giving a high ratio between perpendicular shafts.

  • rack and pinion

    JAラックアンドピニオンVIthanh răng – bánh răng

    A mechanism converting pinion rotation into linear rack motion.

  • module

    JAモジュールVImô-đun (bánh răng)

    A gear tooth size parameter: pitch diameter divided by number of teeth.

  • gear ratio

    JA減速比 げんそくひVItỉ số truyền

    The ratio of input shaft speed to output shaft speed.

  • backlash

    JAバックラッシVIkhe hở cạnh răng (độ rơ)

    The clearance between meshing teeth, causing play on reversal.

  • reducer

    JA減速機 げんそくきVIhộp giảm tốc

    A gear unit that lowers speed and increases torque.

  • belt drive

    JAベルト伝動 ベルトでんどうVIbộ truyền đai

    Power transmission by a belt running over pulleys.

  • V-belt

    JAVベルト ブイベルトVIđai thang (dây curoa)

    A trapezoidal belt driving by friction in pulley grooves.

  • timing belt

    JAタイミングベルトVIđai răng

    A toothed belt meshing with pulleys for slip-free synchronous drive.

  • pulley

    JAプーリVIpuli

    A grooved wheel on a shaft that carries a belt.

  • chain drive

    JAチェーン伝動 チェーンでんどうVIbộ truyền xích

    Power transmission by a chain meshing with sprockets.

  • sprocket

    JAスプロケットVIđĩa xích (nhông)

    A toothed wheel that engages a chain.

  • clutch

    JAクラッチVIly hợp

    A device that engages or disengages torque between two shafts.

  • brake

    JAブレーキVIphanh

    A device that slows or stops motion.

  • cam

    JAカムVIcam

    A shaped part converting rotation into a prescribed follower motion.

  • linkage

    JAリンク機構 リンクきこうVIcơ cấu thanh

    An assembly of links joined by pivots to transform motion.

  • ball screw

    JAボールねじVIvít me bi

    A screw and nut with recirculating balls giving precise linear motion.

  • linear guide

    JAリニアガイドVIray dẫn hướng (thanh trượt)

    A rail and ball carriage guiding precise linear motion.

  • flywheel

    JAフライホイールVIbánh đà

    A heavy wheel storing kinetic energy to smooth rotation.

  • lubrication

    JA潤滑 じゅんかつVIbôi trơn

    Applying oil or grease to contacting surfaces to reduce friction and wear.

  • grease

    JAグリースVImỡ bôi trơn

    A semi-solid lubricant of oil and a thickener.

  • torque limiter

    JAトルクリミッタVIbộ giới hạn mô-men

    A device that slips or disconnects when torque exceeds a set value, protecting the machine.

  • safety factor

    JA安全率 あんぜんりつVIhệ số an toàn

    The ratio of failure load to allowable working load.

  • stress concentration

    JA応力集中 おうりょくしゅうちゅうVItập trung ứng suất

    A local rise in stress at notches, holes or fillets.

  • bending moment

    JA曲げモーメント まげモーメントVImô-men uốn

    The moment causing bending in a beam or shaft.

  • torque

    JAトルクVImô-men xoắn

    A moment that causes rotation or twisting about an axis.

Technical drawing & metrology 76

  • technical drawing

    JA製図 せいずVIbản vẽ kỹ thuật

    A standardised drawing showing a part's shape, dimensions and requirements.

  • part drawing

    JA部品図 ぶひんずVIbản vẽ chi tiết

    A drawing of a single part with all information needed to make it.

  • assembly drawing

    JA組立図 くみたてずVIbản vẽ lắp

    A drawing showing how parts are positioned and fitted together.

  • title block

    JA表題欄 ひょうだいらんVIkhung tên

    The box listing drawing title, number, scale, material and approvals.

  • bill of materials

    JA部品表 ぶひんひょうVIbảng kê vật tư (BOM)

    A list of a product's parts, quantities and materials; abbreviated BOM.

  • scale

    JA尺度 しゃくどVItỉ lệ

    The ratio of drawn size to actual size.

  • third angle projection

    JA第三角法 だいさんかくほうVIphép chiếu góc thứ ba

    A projection method placing each view on the side it is viewed from, used in Japan and the US.

  • first angle projection

    JA第一角法 だいいっかくほうVIphép chiếu góc thứ nhất

    A projection method placing each view opposite its viewing side, used in Vietnam and Europe.

  • front view

    JA正面図 しょうめんずVIhình chiếu đứng

    The principal view showing the most features of the object.

  • top view

    JA平面図 へいめんずVIhình chiếu bằng

    The view looking down from above.

  • side view

    JA側面図 そくめんずVIhình chiếu cạnh

    The view seen from the left or right side.

  • section view

    JA断面図 だんめんずVIhình cắt

    A view of the object beyond an imaginary cutting plane, revealing internal features.

  • detail view

    JA詳細図 しょうさいずVIhình trích

    An enlarged view of a small area for clear dimensioning.

  • isometric view

    JA等角図 とうかくずVIhình chiếu trục đo

    A pictorial view with three axes equally spaced at 120°.

  • hidden line

    JAかくれ線 かくれせんVInét đứt (đường khuất)

    A dashed line representing an edge not directly visible.

  • center line

    JA中心線 ちゅうしんせんVIđường tâm

    A thin chain line showing an axis of symmetry or hole centre.

  • hatching

    JAハッチングVIđường gạch mặt cắt

    Parallel lines indicating cut surfaces in a section view.

  • dimension

    JA寸法 すんぽうVIkích thước

    A numerical value on a drawing giving size or location.

  • dimension line

    JA寸法線 すんぽうせんVIđường kích thước

    A thin line with arrowheads on which a dimension value is written.

  • extension line

    JA寸法補助線 すんぽうほじょせんVIđường gióng

    A thin line extending from the object to bound a dimension line.

  • nominal size

    JA基準寸法 きじゅんすんぽうVIkích thước danh nghĩa

    The basic size from which limit deviations are calculated.

  • tolerance

    JA公差 こうさVIdung sai

    The permitted difference between maximum and minimum limits of size.

  • upper deviation

    JA上の許容差 うえのきょようさVIsai lệch trên

    The difference between the maximum limit and the nominal size.

  • lower deviation

    JA下の許容差 したのきょようさVIsai lệch dưới

    The difference between the minimum limit and the nominal size.

  • general tolerance

    JA普通公差 ふつうこうさVIdung sai chung

    Tolerance applied to dimensions without individual tolerances.

  • IT grade

    JAIT基本公差等級 アイティーきほんこうさとうきゅうVIcấp chính xác (IT)

    ISO standard tolerance grade IT01–IT18; IT stands for International Tolerance.

  • fit

    JAはめあいVIlắp ghép

    The relationship between hole and shaft sizes, giving clearance or interference.

  • clearance fit

    JAすきまばめVIlắp lỏng (lắp có độ hở)

    A fit that always leaves clearance between hole and shaft.

  • interference fit

    JAしまりばめVIlắp chặt (lắp có độ dôi)

    A fit in which the shaft is always larger than the hole.

  • transition fit

    JA中間ばめ ちゅうかんばめVIlắp trung gian

    A fit that may give either slight clearance or slight interference.

  • hole-basis system

    JA穴基準はめあい あなきじゅんはめあいVIhệ thống lỗ cơ bản

    A fit system using H holes as basis and varying the shaft tolerance.

  • geometric tolerance

    JA幾何公差 きかこうさVIdung sai hình học

    Tolerances controlling form, orientation, location and runout.

  • GD&T

    JAGD&T ジーディーアンドティーVIGD&T (ghi kích thước và dung sai hình học)

    Geometric Dimensioning and Tolerancing, a symbolic system for specifying geometry.

  • datum

    JAデータムVIchuẩn (mặt chuẩn)

    A theoretical point, line or plane used as reference for tolerances.

  • flatness

    JA平面度 へいめんどVIđộ phẳng

    The deviation of a surface from a perfect plane.

  • straightness

    JA真直度 しんちょくどVIđộ thẳng

    The deviation of a line from a perfect straight line.

  • roundness

    JA真円度 しんえんどVIđộ tròn

    The deviation of a cross-section from a perfect circle.

  • cylindricity

    JA円筒度 えんとうどVIđộ trụ

    The deviation of a surface from a perfect cylinder.

  • parallelism

    JA平行度 へいこうどVIđộ song song

    The orientation deviation of a feature parallel to a datum.

  • perpendicularity

    JA直角度 ちょっかくどVIđộ vuông góc

    The orientation deviation of a feature at 90° to a datum.

  • concentricity

    JA同心度 どうしんどVIđộ đồng tâm

    The deviation between the centres of two circular features.

  • position tolerance

    JA位置度 いちどVIdung sai vị trí

    The zone within which a feature's centre may deviate from its true position.

  • runout

    JA振れ ふれVIđộ đảo

    The surface variation when a part rotates once about a datum axis.

  • surface roughness

    JA表面粗さ ひょうめんあらさVIđộ nhám bề mặt

    The fine irregularities of a machined surface.

  • Ra

    JA算術平均粗さ さんじゅつへいきんあらさVIRa (sai lệch trung bình số học)

    Arithmetic average roughness, the mean absolute profile deviation.

  • chamfer

    JA面取り めんとりVIvát mép

    A bevel on a part edge, marked C on Japanese drawings.

  • fillet

    JA隅の丸み すみのまるみVIgóc lượn (bo góc)

    A rounded concave corner between two surfaces, marked R.

  • revision

    JA改訂 かいていVIphiên bản sửa đổi (rev.)

    A change to a drawing, recorded with a letter and description.

  • CAD

    JACAD キャドVICAD (thiết kế có máy tính hỗ trợ)

    Computer-Aided Design, software for designing and drafting.

  • metrology

    JA計測 けいそくVIđo lường học

    The science and practice of measurement.

  • vernier caliper

    JAノギスVIthước cặp

    An instrument with a vernier scale measuring outside, inside and depth dimensions.

  • micrometer

    JAマイクロメータVIpanme

    A screw-based measuring instrument reading to 0.01 mm.

  • dial gauge

    JAダイヤルゲージVIđồng hồ so

    A dial indicator measuring small deviations such as runout or flatness.

  • gauge block

    JAブロックゲージVIcăn mẫu

    A precision steel block of exact size used to calibrate instruments.

  • plug gauge

    JAプラグゲージVIcalip nút

    A go/no-go gauge for checking holes.

  • go/no-go gauge

    JA限界ゲージ げんかいゲージVIcalip lọt – không lọt

    A gauge with go and no-go ends for quick limit checks.

  • surface plate

    JA定盤 じょうばんVIbàn máp

    A flat granite or cast-iron reference surface for measurement.

  • CMM

    JA三次元測定機 さんじげんそくていきVImáy đo toạ độ 3 chiều (CMM)

    Coordinate Measuring Machine, a probe-based 3D measuring system.

  • calibration

    JA校正 こうせいVIhiệu chuẩn

    Comparing an instrument with a standard to determine and correct error.

  • measurement uncertainty

    JA測定不確かさ そくていふたしかさVIđộ không đảm bảo đo

    The range within which the true measured value is estimated to lie.

  • quality control

    JA品質管理 ひんしつかんりVIkiểm soát chất lượng (QC)

    Activities ensuring products meet requirements; abbreviated QC.

  • inspection

    JA検査 けんさVIkiểm tra

    Measuring and examining a product against specifications to judge conformity.

  • incoming inspection

    JA受入検査 うけいれけんさVIkiểm tra đầu vào

    Inspection of purchased materials and parts on receipt.

  • first article inspection

    JA初品検査 しょひんけんさVIkiểm tra sản phẩm đầu tiên

    A full inspection of the first part of a run or after a change.

  • inspection report

    JA検査成績書 けんさせいせきしょVIbiên bản kiểm tra

    A document recording measured results and judgement.

  • defect

    JA不良 ふりょうVIkhuyết tật (lỗi)

    A product or characteristic that fails to meet requirements.

  • nonconformity

    JA不適合 ふてきごうVIsự không phù hợp (NG)

    Failure to fulfil a specified requirement.

  • sampling inspection

    JA抜取検査 ぬきとりけんさVIkiểm tra lấy mẫu

    Inspecting a sample to decide on accepting a lot.

  • process capability

    JA工程能力 こうていのうりょくVInăng lực quá trình (Cpk)

    A process's ability to stay within tolerance, measured by Cp and Cpk.

  • control chart

    JA管理図 かんりずVIbiểu đồ kiểm soát

    A chart tracking process data against upper and lower control limits.

  • SPC

    JA統計的工程管理 とうけいてきこうていかんりVIkiểm soát quá trình bằng thống kê (SPC)

    Statistical Process Control, using statistics to monitor a process.

  • root cause analysis

    JAなぜなぜ分析 なぜなぜぶんせきVIphân tích nguyên nhân gốc

    Tracing a defect to its underlying cause, often by repeatedly asking why.

  • corrective action

    JA是正処置 ぜせいしょちVIhành động khắc phục

    An action eliminating the cause of a defect to prevent recurrence.

  • traceability

    JAトレーサビリティVItruy xuất nguồn gốc

    The ability to trace a product's history, origin and processing.

  • ISO 9001

    JAISO 9001 アイエスオー9001VIISO 9001

    The ISO (International Organization for Standardization) standard for quality management systems.

  • JIS

    JA日本産業規格 にほんさんぎょうきかくVIJIS (tiêu chuẩn công nghiệp Nhật)

    Japanese Industrial Standards, Japan's national industrial standards.

Engines, automotive & fluid power 67

  • internal combustion engine

    JA内燃機関 ないねんきかんVIđộng cơ đốt trong

    An engine that burns fuel inside its cylinders to produce work.

  • gasoline engine

    JAガソリンエンジンVIđộng cơ xăng

    A spark-ignition engine running on gasoline.

  • diesel engine

    JAディーゼルエンジンVIđộng cơ diesel

    A compression-ignition engine injecting diesel into hot compressed air.

  • four-stroke engine

    JA4サイクルエンジン フォーサイクルエンジンVIđộng cơ bốn kỳ

    An engine completing intake, compression, power and exhaust in four strokes.

  • cylinder

    JAシリンダVIxi lanh

    The bore in which a piston reciprocates.

  • cylinder block

    JAシリンダブロックVIthân máy (block)

    The main casting housing an engine's cylinders.

  • cylinder head

    JAシリンダヘッドVInắp máy (mặt quy lát)

    The top cover of the cylinders containing valves and combustion chambers.

  • piston

    JAピストンVIpiston

    The part moving in the cylinder that receives combustion pressure.

  • piston ring

    JAピストンリングVIxéc-măng

    A ring on the piston sealing the chamber and controlling oil.

  • connecting rod

    JAコンロッドVIthanh truyền (tay biên)

    The rod linking piston and crankshaft.

  • crankshaft

    JAクランクシャフトVItrục khuỷu (trục cơ)

    The shaft converting piston reciprocation into rotation.

  • camshaft

    JAカムシャフトVItrục cam

    A shaft with cams that open and close the valves.

  • valve

    JAバルブVIxupap

    A poppet that opens and closes intake and exhaust ports.

  • spark plug

    JA点火プラグ てんかプラグVIbugi

    A device producing a spark to ignite the fuel mixture.

  • fuel injector

    JAインジェクタVIkim phun nhiên liệu

    A device spraying atomised fuel into the intake or chamber.

  • turbocharger

    JAターボチャージャVItăng áp (turbo)

    A device using exhaust to drive a turbine that compresses intake air.

  • displacement

    JA排気量 はいきりょうVIdung tích xi lanh

    The total swept volume of all pistons, in cc or litres.

  • compression ratio

    JA圧縮比 あっしゅくひVItỉ số nén

    The ratio of maximum to minimum cylinder volume.

  • horsepower

    JA馬力 ばりきVImã lực

    A unit of engine power of about 0.735–0.746 kW.

  • rpm

    JA回転数 かいてんすうVIvòng/phút (rpm)

    Rotational speed in revolutions per minute.

  • radiator

    JAラジエータVIkét nước (két làm mát)

    A heat exchanger cooling engine coolant with air.

  • thermostat

    JAサーモスタットVIvan hằng nhiệt

    A valve regulating coolant flow according to engine temperature.

  • engine oil

    JAエンジンオイルVIdầu máy (nhớt)

    Oil that lubricates, cools and cleans engine parts.

  • air filter

    JAエアクリーナVIlọc gió

    A filter removing dust from engine intake air.

  • exhaust system

    JA排気系 はいきけいVIhệ thống xả

    Piping that carries exhaust gas, including catalyst and muffler.

  • catalytic converter

    JA触媒コンバータ しょくばいコンバータVIbộ xúc tác khí thải

    A device converting harmful exhaust gases into less harmful ones.

  • ECU

    JAECU イーシーユーVIbộ điều khiển động cơ (ECU)

    Electronic Control Unit managing fuel injection, ignition and more.

  • transmission

    JAトランスミッションVIhộp số

    A gear unit changing the ratio between engine and wheels.

  • manual transmission

    JAマニュアルトランスミッションVIhộp số sàn

    A gearbox shifted by the driver using a lever and clutch pedal.

  • automatic transmission

    JAオートマチックトランスミッションVIhộp số tự động

    A gearbox shifting by itself, usually with a torque converter.

  • CVT

    JACVT シーブイティーVIhộp số vô cấp (CVT)

    Continuously Variable Transmission using a belt and variable pulleys.

  • differential

    JAデファレンシャルVIbộ vi sai

    A gear set letting wheels turn at different speeds in corners.

  • drive shaft

    JAドライブシャフトVItrục các-đăng (trục truyền động)

    A shaft carrying torque from the gearbox or differential to the wheels.

  • chassis

    JAシャシーVIkhung gầm (sát-xi)

    The frame and running gear supporting the vehicle.

  • suspension

    JAサスペンションVIhệ thống treo

    The system linking wheels to body and absorbing road shocks.

  • shock absorber

    JAショックアブソーバVIgiảm xóc (phuộc)

    A damper that controls suspension spring oscillation.

  • steering system

    JAステアリング装置 ステアリングそうちVIhệ thống lái

    The system controlling the vehicle's direction.

  • power steering

    JAパワーステアリングVItrợ lực lái

    A hydraulic or electric system reducing steering effort.

  • disc brake

    JAディスクブレーキVIphanh đĩa

    A brake with pads clamping a disc that turns with the wheel.

  • drum brake

    JAドラムブレーキVIphanh tang trống

    A brake with shoes pressing inside a rotating drum.

  • brake pad

    JAブレーキパッドVImá phanh

    A friction pad pressed against the brake disc.

  • ABS

    JAABS エービーエスVIhệ thống chống bó cứng phanh (ABS)

    Anti-lock Braking System preventing wheels from locking.

  • tire

    JAタイヤVIlốp xe

    The inflated rubber casing fitted on a wheel rim.

  • wheel alignment

    JAホイールアライメントVIcân chỉnh góc đặt bánh xe

    Adjusting wheel angles such as toe and camber to specification.

  • hybrid vehicle

    JAハイブリッド車 ハイブリッドしゃVIxe hybrid

    A vehicle combining an engine with an electric motor.

  • electric vehicle

    JA電気自動車 でんきじどうしゃVIxe điện (EV)

    A vehicle driven solely by electric motors and a battery; abbreviated EV.

  • periodic inspection

    JA車検 しゃけんVIđăng kiểm (kiểm định định kỳ)

    Mandatory periodic technical and safety inspection of a vehicle.

  • hydraulics

    JA油圧 ゆあつVIthuỷ lực

    Transmitting and controlling power with pressurised liquid.

  • pneumatics

    JA空気圧 くうきあつVIkhí nén

    Transmitting and controlling power with compressed air.

  • hydraulic pump

    JA油圧ポンプ ゆあつポンプVIbơm thuỷ lực

    A pump converting mechanical power into pressurised oil flow.

  • gear pump

    JA歯車ポンプ はぐるまポンプVIbơm bánh răng

    A positive-displacement pump using meshing gears.

  • hydraulic cylinder

    JA油圧シリンダ ゆあつシリンダVIxi lanh thuỷ lực

    An actuator converting oil pressure into linear motion.

  • pneumatic cylinder

    JAエアシリンダVIxi lanh khí nén

    A cylinder producing linear motion from compressed air.

  • hydraulic motor

    JA油圧モータ ゆあつモータVImô-tơ thuỷ lực

    An actuator converting oil pressure into rotation.

  • directional control valve

    JA方向制御弁 ほうこうせいぎょべんVIvan phân phối (van đảo chiều)

    A valve directing flow to change actuator direction.

  • solenoid valve

    JA電磁弁 でんじべんVIvan điện từ

    A valve operated by an electromagnetic coil.

  • relief valve

    JAリリーフ弁 リリーフべんVIvan an toàn (van tràn)

    A valve returning oil to tank when pressure exceeds its setting.

  • check valve

    JA逆止弁 ぎゃくしべんVIvan một chiều

    A valve allowing flow in one direction only.

  • flow control valve

    JA流量制御弁 りゅうりょうせいぎょべんVIvan tiết lưu

    A valve regulating flow to control actuator speed.

  • pressure reducing valve

    JA減圧弁 げんあつべんVIvan giảm áp

    A valve keeping outlet pressure lower and steady.

  • accumulator

    JAアキュムレータVIbình tích áp

    A vessel storing pressurised oil to supplement flow and absorb shocks.

  • air compressor

    JA空気圧縮機 くうきあっしゅくきVImáy nén khí

    A machine compressing air to supply pneumatic systems.

  • FRL unit

    JAエアフィルタ・レギュレータ・ルブリケータVIbộ lọc – điều áp – tra dầu (FRL)

    Filter, Regulator, Lubricator unit conditioning compressed air supply.

  • hydraulic oil

    JA作動油 さどうゆVIdầu thuỷ lực

    The fluid transmitting power in a hydraulic system.

  • hydraulic circuit diagram

    JA油圧回路図 ゆあつかいろずVIsơ đồ mạch thuỷ lực

    A diagram using standard symbols to show components and lines.

  • flow rate

    JA流量 りゅうりょうVIlưu lượng

    The volume of fluid passing per unit time.

  • pressure

    JA圧力 あつりょくVIáp suất

    Force per unit area, expressed in MPa or bar.